11 - 20 of 65
comparison standard penetration test block
Selling leads
|
... material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is ...
2024-12-09 11:10:00
|
|
...Block for Beam Characterization and Evaluation of System Performance characteristics Specifications: Calibration blocks is an important supplementa...
2024-12-09 11:10:00
|
|
... material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is ...
2024-12-09 11:10:00
|
|
NDT Test Block 1018 Carbon Steel A7 Ultrasonic Test Block A7 calibration block Standard: BS2704:1978 RTB-A7(BS) Checking shear wave probe resolution ...
2024-12-09 22:48:39
|
|
Ultrasonic Flaw Detector Calibration Test Block HUATEC offers calibration test blocks for ultrasonic flaw detectors with different materials Model ...
2025-01-08 16:44:37
|
|
...h surface diameter greater than 500mm, test blocks with the same curvature as the workpiece or standard test blocks with a diameter equal to or ...
2025-07-14 00:05:16
|
|
MT Ketos Ring B test block DC, HRC=90～95,12 drilling through holes diameter 0.07inch,center hole diameter 31.8mm, ASTM E709-95,1444-01 Standard ASTM ...
2025-01-08 16:44:37
|
|
...sensitivity comparison of new and old penetrants. The test block has symmetrical defects on both sides A and B, and can be compared with different ...
2024-12-16 14:30:18
|
|
... Comparison Ultrasonic Calibration block The AWS Resolution Reference Block is used for checking resolution capabilities of angle beam transducers. ...
2025-07-10 07:30:29
|
|
... of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Material: Test Report according to ISO 10474-3.1.B,JIS G ...
2024-12-09 22:08:10
|