71 - 80 of 90
e40 lamp cap gauge
Selling leads
|
Go gauges for screw threads of lampholders E14 | 7006-25-7 Purpose: to check the minimum dimensions of the lampholder screw thread and dimension X ...
2025-06-20 20:17:41
|
|
IEC60061-3: 7006-22C-1 E27 Gauge I for Checking Side Contact Resiliency in Lampholders For details of gauge II, see sheet 7006-22D. The conical part ...
2025-07-01 21:23:51
|
|
DIN-VDE0620-1:2021 Bild 16a temperature rise plug gauge Prufestecker 2P+AC 16A DIN-VDE0620-1 plug and socket gauge Figure number Project name Qty DIN...
2025-06-20 20:17:39
|
|
ANSI C81.63 Threaded Gauge For Testing Unacceptable Contact-Making In E26d Double Contact-Medium-Screw Based Lampholders ANSI C81.63-2019 3-179...
2025-06-20 20:17:37
|
|
ISO 8124-1 2014 Stainless Steel Protrusion Test Gauge Technical Parameter Material Stainless steel torerances+/-0.1mm 1.Inner diameter 13mm Outer ...
2025-06-20 20:17:46
|
|
UL 498 Temperature Rise Socket Gauge Made of Brass and Plastic
2025-06-20 20:17:39
|
|
...axial strength of the cap does not decrease when the unmounted cap was assembled to the finished lamp, test results on the unmounted cap can be ...
2025-06-20 20:19:40
|
|
"Go" Gauges For Caps On Finished Lamps e11, 7006-6-1
2025-06-20 20:20:37
|
|
...lamp series Pass rule|7006-45-4 Pass check gauge|7006-44-4 2 E17 lamp series Pass rule|7006-27K-1 Stop gauge|7006-28F-1 Contact performance gauge...
2025-06-20 20:17:29
|
|
UL 1017 clause 5.19.4.1 Figure 9 Impactor for testing mechanical strength for brush caps and switch actuator test purpose:testing mechanical strength ...
2025-06-20 20:17:39
|