11 - 20 of 90
e40 lamp cap gauge
Selling leads
... E27 caps on finished lamps shown on 7004-21. LED Lamp Cap Gauge Series: IEC60061-3, 7006-27B-1 "Go"gauges for E40 and E27 caps on ...
2025-06-20 20:17:48
|
...Lamp cap gauge | Gauge For Caps on Finished Lamps for Testing Protection Against Accidental Contact E27 | 7006-51-2 Purpose: to check protection ...
2025-06-20 20:17:43
|
...Lamp cap gauge | Gauge For Finished Lamps Fitted With E27 Caps For Testing Contact Making | 7006-50-1 Purpose:To check lamp dimensions for contact ...
2025-06-20 20:19:00
|
...GX53 Lamp cap gauge 7006-142D-1 not go gauge for caps GX53 IEC60061-3 GX53 Lamp cap gauge 7006-142E-1 go and not go gauge for checking keyways in ...
2025-06-20 20:17:35
|
.... Testing: when the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond ...
2025-06-20 20:17:41
|
...: when the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surgace W shall be co-planar with or project ...
2025-06-20 20:17:41
|
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ...
2025-06-20 20:17:28
|
...lamp cap gauge | Gauge for finished lamps fitted with E14 caps for testing contact making | 7006-54-2 Purpose: to check lamp dimensions for contact ...
2025-06-20 20:17:41
|
...Lamp Cap Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max....
2025-06-20 20:17:47
|
... the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or project beyond ...
2025-06-20 20:17:37
|