21 - 30 of 92
e27 lamp cap gauge
Selling leads
|
... Lampholders. TESTING: The shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the ...
2026-08-03 16:26:40
|
|
...: to check the maximum dimensions of the screw thread and dimension T1 minimum of E40 caps on finished lamps. Testing: when the cap on a finished ...
2025-09-04 18:15:26
|
|
...lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to ...
2026-08-03 16:26:40
|
|
...lamp cap gauge | Gauge for finished lamps fitted with E14 caps for testing protection against accidental contact E14-7006-55-2 Purpose: to check ...
2025-09-04 18:15:35
|
|
... cap has been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, ...
2025-09-04 18:15:41
|
|
7006-52-1 Lamp cap gauge for finished lamps fitted with E40 caps for testing contact making Standard E40 Lamp cap gauge 7006-52-1 gauge for finished ...
2025-09-04 18:15:20
|
|
...Lamp cap gauge | "NOT GO" Gauge For Caps GX53 | 7006-142D-1 PURPOSE: To check the minimum cap diameter (dimension L1) of caps GX53-.. ...
2026-08-03 16:26:43
|
|
...be possible to insert the cap into the gauge. Related gauges for GX53 7006-142-1 "GO" AND "NOT GO" GAUGE FOR CAPS GX53 PURPOSE: ...
2026-08-03 16:26:43
|
|
...been pushed into the gauge as far as it will go, surface W of the plunger shall not project beyond surface X. For caps on finished lamps, surface W ...
2025-09-04 18:15:37
|
|
...Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1 PURPOSE: PURPOSE: To check caps GX53-1 in the following ...
2026-08-03 16:26:42
|