11 - 20 of 90
e27 lamp cap gauge
Selling leads
|
...respect of: a) contact-making with lamps having adverse dimensions. b) protection against accidental contact with live parts, viz, the cap shell, ...
2025-06-20 20:17:45
|
|
... holder. Testing: the gauge is screwed home in the lampholder as far as it will go. The combination is then placed with the plunger of the gauge in ...
2025-06-20 20:17:45
|
|
...GX53 Lamp cap gauge 7006-142D-1 not go gauge for caps GX53 IEC60061-3 GX53 Lamp cap gauge 7006-142E-1 go and not go gauge for checking keyways in ...
2025-06-20 20:17:35
|
|
.... Testing: when the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the centre contact shall not project beyond ...
2025-06-20 20:17:41
|
|
...: when the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surgace W shall be co-planar with or project ...
2025-06-20 20:17:41
|
|
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ...
2025-06-20 20:17:28
|
|
...lamp cap gauge | Gauge for finished lamps fitted with E14 caps for testing contact making | 7006-54-2 Purpose: to check lamp dimensions for contact ...
2025-06-20 20:17:41
|
|
...Lamp Cap Gauge | "GO" Gauge For Bi-Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max....
2025-06-20 20:17:47
|
|
... the cap on a finished lamp has been screwed into the gauge as far as it will go, the centre contact shall be co-planar with, or project beyond ...
2025-06-20 20:17:37
|
|
... on finished lamps. TESTING: When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the central contact shall ...
2025-06-20 20:17:27
|