31 - 40 of 72
3 4mm test pin
Selling leads
|
... apparatus as shown in IEC60065 Figure 11. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue ...
2025-06-20 20:19:05
|
|
...five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient ...
2025-06-20 20:18:31
|
|
Splash Tester for IEC60335-2-24 Water Spillage Apparatus for testing refrigerating appliances. It consists of the vessel, removable bridge support, ...
2024-12-09 17:19:27
|
|
... at points where the separations will be subject to the maximum potential gradient during the tests. The scratches are made by means of a hardened ...
2025-06-20 20:19:04
|
|
... for testing the firmness of the plug and the plug pin. The plug is placed on a rigid steel plate provided with holes suitable for the pins of the ...
2025-06-20 20:21:12
|
|
...Pin Cap On Finished Lamps G13-7006-46A-3 Purpose: Purpose: to check dimensions E max.,F min.,F max.,and the combined pin diameter and displacement ...
2025-06-20 20:17:47
|
|
UL 60335-2-24-Figure 101.DVA.1 – Articulate probe with flat and cone shaped hand 3.5 – 4.5 year age Notes: 1 – The probes were designed with a center ...
2025-06-20 20:20:25
|
|
...Pin American Standard UL498 plug and socket gauge Gauge drawing number standard number number name 1 Articulate probe with web stop Figure 9.1 UL ...
2025-06-20 20:21:05
|
|
... © IEC(E) STANDARD SHEET 2-Ild sheet 1 Test-VEHICLE INLET2: 63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE 3 IEC62196-2/Ed.3/CDV © IEC(E) ...
2025-06-20 20:20:48
|
|
...manufacture, it is mainly used to test the plug device and its accessories around, such as dimmers, fuses, switches, power regulators, etc., and it ...
2025-06-20 20:21:00
|