41 - 50 of 72
3 4mm test pin
Selling leads
|
... bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter ...
2025-06-20 20:17:28
|
|
... of pins (including bosses) of bi-pin caps G13 on finished lamps. Testing: the pins of the caps on finished lamps shall enter the gauge at surface ...
2025-06-20 20:17:28
|
|
...unmounted bi-pin cap(not for use on finished lamps) G5-7006-46-3 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin ...
2025-06-20 20:17:43
|
|
Bs1363-1:1995 Figure 9 | Apparatus For Abrasion Test On Insulating Sleeves Of Plug Pins
2025-06-20 20:20:32
|
|
BS1363-2:1995 Figure 33 | Apparatus For Torsion Test On Pins
2025-06-20 20:20:34
|
|
BS1363-2:1995 Figure 32 | Apparatus For Tests On Adaptor Pins
2025-06-20 20:20:37
|
|
BS1363-1:1995 Figure 8 | Plug Pin Deflection Test Apparatus For Resilient Adaptors
2025-06-20 20:20:37
|
|
... IEC 60884-1 Fig 18 and Fig 19. It is used to test whether the maximum force of pulling the plug from the socket and the minimum force of pulling ...
2025-06-20 20:21:11
|
|
... which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins ...
2025-06-20 20:20:54
|
|
...Test Apparatus at High Temperature 1. Product information: Standard: IEC 60884-1-figure 41, IEC 60598- 2-20 clause 20.15 ,VDE0620-Bild 40, BS1363 ...
2025-06-20 20:21:11
|