KP-NH12 Av Test Equipment , Covering Scratch Tester PLC Control
|
|
Covering Scratch Tester
Product details:
The device is used to check abrasion strength of printed circuit boards scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests.
The scratches are made by means of a hardened steel pin, the end of which has the form of a cone having a tip angle of 40°, its tip being rounded and polished, with a radius of 0.25 mm ± 0.02 mm.
Scratches are made by drawing the pin along the surface in a plane perpendicular to the conductor edges at a speed of 20 mm/s ± 5 mm/s. The pin is so loaded that the force exerted along its axis is 10 N ± 0.5 N. The scratches shall be at least 5 mm apart and at least 5 mm from the edge of the specimen.
Technical Parameters:
|
||||||||||||||||||||
| Product Tags: tv test equipment tv signal tester |
|
Durable Electronic Pulse Generator IEC 62368-1 Figure D.3 Compliant for Industrial Applications |
|
IEC62368 G.9/Table G.11 Integrated Circuit IC Current Limiters Tester Ensure Compliance and Safety |
|
Test Pulse Waveform 10/700uS and Continuously Set Protection Values for IEC62368 Test Equipment |
|
Partial Voltage Ratio of Monitoring Output 1 ≤ 1000 IEC62368 Test Equipment with Continuously set protection values |
|
50 Hz ±2 Hz Working Power High Voltage Impulse Generator with Positive and Negative Alternating Switching |
|
High Voltage Impulse Test for Testing Pulse Waveform 2 0-6kV Output Pulse Voltage Range 400VA Transformer Power |