1 - 10 of 10
iec60695 laboratory needle flame tester
Selling leads
|
...leakage current in cable & wire and the like. It meets the requirements of Chinese GB4706.1, GB5169.5, and IEC60695-2-2 and IEC61347-1 standards. ...
2025-07-09 00:07:11
|
|
...Needle Flame Tester Use It used to determine flammability, ignition temperature and fire fatalness for products, which include lighting, low ...
2024-12-09 18:03:30
|
|
... IEC60695 Needle Flame Test Chamber Introductions Needle Flame Test Chamber is used to test the resistance of fire caused by an interior fault such ...
2024-12-09 17:51:53
|
|
...leakage current in cable & wire and the like. It meets the requirements of Chinese GB4706.1, GB5169.5, and IEC60695-2-2 and IEC61347-1 standards. ...
2024-12-09 17:51:53
|
|
...Flame Tester Description According to GB/T 17622-2008 and EN 60903 the insulating glove fire resistance test device is developed, which is suitable ...
2024-12-09 19:00:03
|
|
... the resistance of fire caused by an interior fault such as leakage current in cable & wire and the like. It meets the requirements of Chinese ...
2024-12-09 22:28:29
|
|
IEC60695-11-03 Single Cable Vertical Flammability Tester Product introduction Single Cable Combustion Tester is the most widely used and lower cost of ...
2024-12-09 18:03:30
|
|
...Tester with MCU Control Application Suitable for laboratory conditions under the ISO 845: 1985 measured by the density of less than 250kg / m3 of ...
2024-12-09 17:58:39
|
|
...plastic samples under small flames in the horizontal combustion performance. Standards ISO9722 ISO 97738 Specification 1. Ambient temperature: -10 ...
2024-12-09 18:27:44
|
|
|
...Horizontal and Vertical Flammability Tester with MCU Control Application Suitable for laboratory conditions under the ISO 845: 1985 measured by the ...
2024-12-09 18:30:49
|