371 - 380 of 444
src543 shank rc drill bit
Selling leads
|
Product description Product introduction: A down-the-hole drill, usually called DTH is mainly a pneumatic powered rock or ground drill, in which the ...
2024-12-09 12:57:59
|
|
...Shank QL40 DTH Drill Hammer with Special Steel for Underground Mining Product Description: DTH drilling is very simple method for the operators for ...
2024-12-09 18:14:14
|
|
...Shank MP35 Hammer For Surface Mining And Well Drilling Technical parameter MP35 DTH hammer: shank MP35 Length(less bit) 881mm External diameter ...
2024-12-09 13:08:32
|
|
... (less bit) 487kg (1071lbs) Hole range 305mm-445mm Working pressure 10-25bar Impact rate at 1.7 Mpa 16Hz Recommended rotation speed 15-25 r/min Air ...
2024-12-09 12:11:40
|
|
... pin Weight (less bit) 100kg Hole range 155mm-203mm Working pressure 10-35bar Impact rate at 1.7 Mpa 23Hz Recommended rotation speed 20-30 r/min ...
2024-12-09 12:11:40
|
|
...cutting orsample is formed.The drilled sampledoes not have to travel the length of the hammer where contamination and loss of sample takes place. ...
2024-12-09 12:11:48
|
|
Tubeless Down The Hole Hammer 10 Inch Hammer Without Footvalve For Shank SD10 Future: 1. Deliver maximum energy to drilling bit, fast drilling speed ...
2024-12-09 12:11:48
|
|
Well Drilling Expert HQL Series Down The Hole Hammer 5 Inch Hammer HQL60 For Shank QL60 Future: 1. Deliver maximum energy to drilling bit, fast ...
2024-12-09 12:11:40
|
|
Water Well Drilling Expert Down The Hole Hammer 8 Inch HSD Series HSD8 for SD8 shank Future: 1. Deliver maximum energy to drilling bit, fast drilling ...
2024-12-09 12:11:40
|
|
Drilling Machine Spares Down The Hole Hammer 6 Inch Model HSD6 for Shank SD6 Future: 1. Deliver maximum energy to drilling bit, fast drilling speed ...
2024-12-09 12:11:40
|