ODEX165 Eccentrix Casing ODEX Casing System ODEX Overburden Drilling System

ODEX165 Eccentrix Casing ODEX Casing System ODEX Overburden Drilling System

Product Specification:

ODEX Eccentric Overburden Drilling System, starting with the ODEX90 to suit 114mm O.D. casings to ODEX280. This two-piece system comprises the shank bit holder and the eccentric pilot bit that is secured in the bit holder by a double interlocking pin. This is easily removed to allow for bit are sharpening or replacement. Prodrill ODEX overburden drilling systems are widely used in a variety of applications from well drilling and mining to rock anchoring and site investigation.

Application Range:

It is suitable for drilling water wells, geothermal wells, short mircopiles ,medium mini-type grouting hole of building,dam and harbour project.

1. When drilling starts , the reamer swings out and reams the pilot-hole wide enough for the casing tube to slide down behind the drill bit assembly

2. When the required depth is reached , rotation is reversed carefully, whereupon the reamer swings in , allowing the drill bit assembly to be pulled up through the casing.

3. Casing tubes that are to be left in the drill hole should be sealed at the bottom of the hole by means of cement grout or some other sealing agent.

4. Drilling continues to the desired depth in the bedrock using a conventional drilling.

About Us:

Sollroc , with more 10 years of experience ,is one of the professional manufacturer and supplier of high performance rock drilling tools like: DTH hammers and bits, RC hammers and bits, DTH drill rods and top hammer drilling tools. Our tools are widely used in different drilling applications including mining, quarrying, water well drilling, geotechnical industries and etc.

For more information please contact:
Changsha Sollroc Engineering Equipments Co., Ltd
Tel: 86-731-85551632 Fax: 86-731-85551635
Emai: info@sollroc.com
Skype: jessicaling1982
Skype: yongzhedrill
Website: www.sollroc.com