381 - 387 of 387
src543 shank rc drill bit
Selling leads
|
... of rock drilling tools, like DTH hammers and bits, DTH drill pipes, RC hammers and bits, tophammer button bits, coupling, cross bits, drill rods ...
2024-12-09 13:23:02
|
|
... Recovery" or "Dual Wall Drilling", employs a Dual Wall Pipe where the drilling medium, normally high pressure air, is passed between the outer and ...
2024-12-09 12:11:48
|
|
...Drill Hammer For Blasting Technical parameter SD4 DTH hammer: shank SD4 Length(less bit) 1083mm External diameter 99mm Top sub thread API 2 3/8”REG ...
2024-12-09 13:09:44
|
|
...Drilling Technical parameter M30 DTH hammer: shank M30 Length(less bit) 955mm External diameter 82mm Top sub thread API 2 3/8”REG Weight(less bit) ...
2024-12-09 13:09:05
|
|
...shank Cop44 Length(less bit) 1032mm External diameter 99mm Top sub thread API 2 3/8”REG Weight(less bit) 40.7kg Hole range 110mm-130mm Working ...
2024-12-09 13:09:35
|
|
...m the bore hole by the air exhausted from the DTH Hammer. The technique provides fast drilling of accurately aligned, straight and clean holes in ...
2024-12-09 12:57:59
|
|
...(less bit) 22.4kg Hole range 90mm-110mm Working pressure 7-25bar Impact rate at 17bar 32Hz Recommended rotation speed 30-70rpm Product introduction...
2024-12-09 13:09:05
|