31 - 40 of 167
standard pans for testing
Selling leads
|
... for the pull force test of clip-mounted luminaires. Test requirements: 1). A pull is applied on the cable without jerk for 1 min in the most ...
2024-12-09 20:28:11
|
|
...Test Equipment with 2J to 20J Stainless Steel Pendulum Impact Hammers 1. Introduction IK pendulum hammer is designed according to IEC60068-2-75 and ...
2024-12-09 18:45:16
|
|
...Testing Equipment Glow Wire Tester with Observation Window 1. Standard of Glow Wire Tester: The glow wire tester is designed as perIEC60695-2-1, ...
2024-12-09 18:54:54
|
|
UL Accessability Test Probe as Per UL1278 (PA140A) and UL507 (PA170D) 1. Standard conforms to UL507 (PA170D) , UL1278 (PA140A) , UL398 (PA170B) 2. ...
2024-12-09 22:53:32
|
|
... required conditions for temperature rising test of electric appliance. The dimension and temperature measurement arrangement of test corner can be ...
2024-12-09 18:22:24
|
|
...Test Equipment from -40℃ to +120℃ 1. Introduction The thermal shock test chamber is divided into two-box type and three-box type. The difference is ...
2024-12-09 18:37:16
|
|
... of the EUT against salt-spray corrosion. Salt spray chamber is to simulate the climate near the sea, there are two kinds of test according to ...
2024-12-09 18:48:07
|
|
...GB- T10592-2008, GJB150.3-198, GJB360A-96 Method 107 2. Introduction of Thermal Shock Test Chamber: The thermal shock test chamber is divided into ...
2024-12-09 18:48:25
|
|
... of GB/T10485-2007, GB2423.37-2006 test L, GB4208-2008, IEC60529 (IP code), GB7001-1986 and etc. This equipment is mainly used in IP5X and IP6X ...
2024-12-09 21:30:26
|
|
...h as shells or glass. It is manufactured in accordance with the requirements of IEC60068-2-75, GB/T2423.55, IEC62262, and GB/T20138 standards. It ...
2025-04-25 12:32:45
|