21 - 30 of 167
standard pans for testing
Selling leads
...:1989+A1:1999 and ISO20653 standard. It’s also met the requirements of R1, R2, S1, and S2 of JIS D0203 standard. 2. Features: 1). It’s suitable to ...
2024-12-09 18:22:24
|
...Test as Per ISO6722-1 for Testing Auto Cable 1. Standard conforms to ISO6722-1 clause 5.12.4.1 figure 6, GB/T25085, QC/T730, JASO D608, JASO D611, ...
2024-12-09 23:41:36
|
...-1 clause 8.9.1.7, IEC60335-1 clause 29, IEC61010-1 clause 6.7.1.3, IEC60884-1 clause 28.2, and BS1363-1 clause 8.2 Appendix C. It is widely used ...
2025-04-27 00:06:27
|
Test Finger Probe with 125mm Stop Meet the requirement of IEC60335-2-14 Introduction The test finger probe is designed according to IEC60335, GB4706.1...
2024-12-09 18:22:24
|
...IEC62262 (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS ...
2025-08-03 00:07:44
|
... for Satety Testing 1. Standard of Surface Temperature Probe: IEC60335 2.Application of Surface Temperature Probe: The surface temperature probe is ...
2024-12-09 18:48:07
|
... Withdraw Endurance Testing Machine is designed according to the standard of IEC60335-2-15:2005 clause ...
2024-12-09 18:56:38
|
...Test Finger Probe Kits Test IEC61032 Test Probe B Test Probe 12 Test Probe 13 Test Probe 41 The IEC61032 test probe b, test probe 12, test probe 13 ...
2024-12-09 20:08:06
|
...Tests - Test Eh: Hammer tests>: vertical hammer, UL498 clause SD7.2 2. Application of Vertical Impact Testing Machine The vertical impact testing ...
2024-12-09 18:47:52
|
...~IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006), < basic testing methods of Glow wire, basic testing methods of Glow wire device> and UL 746A, ...
2024-12-09 18:54:54
|