171 - 180 of 226
mechanical impact test apparatus
Selling leads
|
... of the enclosure under test with oscillating tubes (R200-R1600), or the support of the enclosure may be moved up or down. The test is mainly apply ...
2025-07-27 00:07:54
|
|
... equipment during the tests from heating and abnormal operation. One is designed and made with the intention of determining the fulfillment of ...
2024-12-09 18:28:53
|
|
IEC61032 Test Probe 32 Test Rod with Third - Lab Calibration Certificate Introduction: It is designed according to IEC61032 figure 15. This rod is ...
2024-12-09 18:22:24
|
|
...protection against access to hazardous mechanical parts of the grinding system of food waste disposal units. Specification: diameter of probe 25mm ...
2024-12-09 18:22:24
|
|
.... 2. Test Sample of IP3X Test Finger Probe: Easily accessible enclosure live parts or mechanical parts. 3. Introduction of IP3X Test Finger Probe: ...
2024-12-09 18:51:55
|
|
Test Probe 11 Unjointed Test Finer Probe with 50N Thruster Conforms to IEC61032 1. Introduction of Test Probe 11: The test probe 11 is designed ...
2025-07-27 00:07:54
|
|
...14.1 (test B), the test device is applied to assess whether the mechanical suspended device of rigid suspension luminaire has sufficient safety ...
2024-12-09 20:28:11
|
|
...Test Probe Wire Equipped with 42V Electrical Indicator IEC60529 1. Standard of IP40 Test Probe Wire IEC61032 and IEC60529 etc. 2. Test Sample of ...
2024-12-09 18:53:22
|
|
...31clause 5.3/figure A.1, IEC60320-1 clause 23.2, IEC60598-1 clause 4.13.5, IEC60884-1 clause 24.2 for repeat free fall test. The free fall test is ...
2025-01-09 00:03:09
|
|
...Testing Equipment / Apparatus for Checking Withdrawal Force of Appliance Couplers 1. Introduction he appliance couplers withdrawal force testing ...
2025-07-27 00:07:54
|