191 - 200 of 226
mechanical impact test apparatus
Selling leads
|
... and 7 inch touch screen, built-in transformer to ensure rated voltage input. The equipment consists by control cabinet, sample rack and two ...
2024-12-09 18:22:24
|
|
... finger nail probe is mainly used for shocking or the non-removable parts of contacting with moving parts to determine whether it can withstand the ...
2024-12-09 18:22:24
|
|
... the protection of persons against access to hazardous parts, and to verify the mechanical strength of openings in the enclosure or internal ...
2024-12-09 18:30:49
|
|
... Finger Probe would be difficult. The Unjointed Finger Probe meets IEC 61032 requirements, Figure 7, Test Probe 11.The Finger Probe may be used to ...
2025-07-27 00:07:54
|
|
... access to hazardous parts by children of more than 36 months and less than 14 years 3. Application range: Accessible enclosure live parts or ...
2024-12-09 19:16:17
|
|
... to check the mechanical strength of non-solid pins of plugs and portable socket-outlets. A force of 100N is exerted on the pin which is supported ...
2025-07-27 00:07:54
|
|
... for aging test of rocker switch, snap switch, key switch, plug, socket-outlet and coupler of household appliance and similar appliance. Its aim at ...
2024-12-09 18:34:35
|
|
Maximum and Minimum Withdrawal Force Testing Equipment for BS Socket-Outlet 1. Introduction Maximum and minimum withdrawal force testing equipment is ...
2024-12-09 19:46:14
|
|
... Single Operated 0.14J / IK01 Spring Hammer Impact Test Apparatus 1. Introduction This spring hammer can meet the requirement of IEC60068-2-75 and ...
2025-07-27 00:07:54
|
|
...test apparatus for insulation on insulated plug pins at high temperature Figure 2.6 Impact test apparatus for insulation on insulated plug pins at ...
2024-12-09 18:22:24
|