IEC60320-1 Appliance Couplers Maximum And Minimum Withdrawal Force Testing Equipment
|
IEC60320-1 Appliance Couplers Maximum and Minimum Withdrawal Force Testing Equipment / Apparatus for Checking Withdrawal Force of Appliance Couplers
1. Introduction he appliance couplers withdrawal force testing equipment is designed according to IEC60320-1 figure 3 and figure 4 and clause 16 for verification of the maximum withdrawal force of appliance inlet/plug connector, the minimum withdrawal force is verified by inserting the test pin gauge to each individal connector/appliance. The equipment consists of control cabinet, mounting plate, heating device, appliance inlets/plug connector, mass hook, supplementary mass and principal mass. The height of the frame of the device is 550mm, and the distance between the axes of the two columns is 150mm. The appliance inlet / plug connect made of hardened steel with roughness not exceeding 0.8mm.
2. Specification
3. Table 5- Maximum and Minimum Withdrawal Forces
4. Figure
|
|||||||||||||||||||||||||||
Product Tags: Maximum Withdrawal Force Testing Equipment IEC60320-1 Appliance Couplers Testing Equipment Appliance Couplers Testing Equipment |
![]() |
IEC60884-1 Figure 20 Apparatus For Cord Retention Testing |
![]() |
IEC60320-1 Appliance Couplers Maximum And Minimum Withdrawal Force Testing Equipment |
![]() |
IEC 60884-1 Figure 14 Device for Testing Non-Solid Pins to Verify the Mechanical Strength |
![]() |
High Temperature Pressure Test Apparatus Plug Pins IEC60884-1 Figure 41 With Insulating Sleeves |
![]() |
Test Plug for Temperature Rise of BS Socket-Outlets as Per BS1363-2 figure 30 |
![]() |
Apparatus for Mechanical Strength Test on Resilient Covers BS1363-1 Figure 2 for Plug and Socket Tester |