261 - 270 of 552
mandrel electrical test equipment
Selling leads
|
...the base of electrical products when raindrops fall on the ground. It is applied to test the water resistance performance of the bottom of ...
2024-12-09 22:51:31
|
|
... a standard required conditions for temperature rising test of electric appliance.The Black Test Corner is used for the measurement of the ...
2024-12-09 19:58:25
|
|
...Testing Needle Flame Test Apparatus 1. Introduction The needle flame test apparatus is designed according to the requirements of IEC 60695-11-5, GB...
2025-04-25 12:32:48
|
|
...Electrical Safety Testing 50KΩ Non-Inductive Resistor 1. Introduction The 50KΩ Non-Inductive Resistor, names as Measuring Circuits for Touch ...
2025-04-26 07:40:05
|
|
..., DIN40050-9 figure 7 and ISO20653 figure 8 and 9. IPX9K fan jet and jet distribution for test device to verify protection against high pressure...
2026-07-31 00:40:11
|
|
...various standards such as IEC62368, IEC60335, IEC60598, IEC60950, IEC60065, IEC60601, and IEC61010. It is widely used in creepage distance ...
2025-04-27 00:06:27
|
|
...Test Rod with Hemispherical End 1. Introduction The 12mm hemispherical test rod is designed and manufactured according to the requirements of ...
2025-04-26 07:40:05
|
|
... Electrical Parameter Measuring Instrument for Testing Voltage, Current, Power Factor, Frequency, Harmonics Introduction HP - 510 is a multifunctio...
2025-11-02 00:17:02
|
|
..., GB/T 5169.16, GB/T2408, Section 30.2 of IEC60335-1, Section 9.3.2 and Section 14.7 of IEC61010-1. It is widely applied in material testing of ...
2025-04-25 12:32:48
|
|
IEC61010-1 Clause 6.3.1 Figure A.3 Electrical Safety Testing Current Measuring Circuit for Electrical Burns at High Frequencies 1. Introduction The ...
2025-04-26 07:40:05
|