41 - 50 of 152
horizontal flammability test apparatus
Selling leads
|
... Test Apparatus IEC60811-1-4 for Cable Made by SUS304 Stainless Steel 1. Introduction The cold bend test apparatus is designed according to ...
2024-12-09 19:36:56
|
|
...Test Apparatus for Testing the Abrasion Resistance of Current-Carry Hose 1. Standards compliant: IEC60335-2-2 clause 21.102 figure 101 and IEC60335...
2024-12-09 20:43:24
|
|
....103 and figure 102 2. Application: for testing the resistance to flexing of current-carry hose of vacuum cleaner 3. Introduction Curreny-carrying ...
2024-12-09 20:43:24
|
|
... with spillage protection to ensure that the connectors are not affected by liquids when installed in a rated voltage base according to the ...
2024-12-09 20:43:57
|
|
..., IEC60335-2-64 clause 15.1.1 and 15.1.2, GB4706.38 and GB4706.52. It’s used for the splash test of the appliance of the professional type ...
2024-12-09 20:44:28
|
|
...Test Apparatus 1. Introduction The ground recessed luminaires torque load test apparatus is designed according to IEC60598-2-13 figure 13.6.2.1 ...
2024-12-09 21:48:21
|
|
... (0.7J) and IK06 (1J) tests. It can meet the test requirements of IEC62262 and IEC60068-2-75. The spring hammer consists of the body, the striking ...
2025-07-26 00:07:09
|
|
...Mechanical Impact Test Apparatus IEC62262 1. Introduction The pendulum hammer mechanical impact test apparatus can meet the test requirements of ...
2025-07-26 00:07:09
|
|
Appliance Couplers Lateral Pull Test Apparatus 1. Introduction The appliance couplers lateral pull test apparatus is designed to meet the test ...
2025-06-21 00:12:34
|
|
2J Below Pendulum Impact Test Apparatus with 150g Impact Element 12 Month Warranty 1. Introduction The pendulum impact test apparatus is Low energy ...
2024-12-09 18:49:48
|