Lateral Pull Test Apparatus for Testing Appliance Couplers as per IEC60320-1
|
Appliance Couplers Lateral Pull Test Apparatus >1. >Introduction The appliance couplers lateral pull test apparatus is designed to meet the test requirements of IEC60320-1 clause 23.3 and figure 8 to verify if the contact of connectors and appliance outlets have sufficient mechanical strength. A lateral pull force in parallel with the engagement face, is applied to the cable of the connector / plug connector in four directions in step of 90°±5°, a pull force is applied 50 times in each direction to the cord for 1s ±0.5s. After the test, the connector / appliance outlet shall show no damage.
>2. >Specification
|
||||||||||
Product Tags: IEC60320-1 Lateral Pull Test Apparatus Appliance Couplers Lateral Pull Test Apparatus |
![]() |
IEC60320-1 Appliance Couplers Endurance Test Equipment for Testing Break Capacity and Normal Operation |
![]() |
Appliance Couplers Testing Equipment IEC60320-1 Pull Test Equipment for Connectors and Plug Connectors |
![]() |
IEC60320-1 Appliance Couplers Testing Equipment Power Cord Bending Test Apparatus with 16A Output Current |
![]() |
IEC60320-3 High Precision Go And Not Go Gauges For Appliance Couplers Made Of S16 Steel |
![]() |
Appliance Couplers Testing Equipment IEC60320-1 Non-solid Pin Tester with Diameter 4.8mm Rod |
![]() |
Lateral Pull Test Apparatus for Testing Appliance Couplers as per IEC60320-1 |