61 - 70 of 112
finger probe test
Selling leads
...Probes Test Probe C / Test Probe D Ship by Express 1. Introduction: IP code probe is a test probe to verify the degrees of protection specified in ...
2024-12-09 19:16:17
|
IEC61010-1 Clause 8.2.1 12mm Hemispherical Test Rod with Hemispherical End 1. Introduction The 12mm hemispherical test rod is designed and manufacture...
2025-04-26 07:40:05
|
...Test Probe Kits (Wedge Probe, Jointed Test Finger, Rigid Test Finger and Test Pin) 1. Introduction The test probe kits are meet the requirement of ...
2024-12-09 19:02:04
|
...Test Probe Kit Includes Standard Test Finger Long Pin Test Probe Test Probe 41 ect. The PG-60335 contains the probes listed in the core of the UL / ...
2024-12-09 18:44:06
|
...Test Probe Kit Includes Test Hook Standard Test Finger Unjointed Finger Probe etc. The PG-60601 contains the device listed in the core of the UL / ...
2024-12-09 18:44:06
|
Test Probe 11 Unjointed Test Finer Probe with 50N Thruster Conforms to IEC61032 1. Introduction of Test Probe 11: The test probe 11 is designed ...
2025-07-30 00:07:26
|
...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other ...
2025-06-21 00:12:34
|
...Probe with Web Stop / UL Articulated Finger Probe for Accessibility Test / Jointed Test Probe 1. Standard Conforms to: UL858 figure 6.1, IEC62368-1 ...
2025-07-30 00:07:26
|
IEC61032 Rigid Finger Test Probe 11 customized with 50N or 75N Force Introduction: The rigid finger probe is designed according to IEC61032 figure 7 ...
2024-12-09 18:30:49
|
... against access to hazardous parts. The jointed test finger is also used to verfiy the protection against access with a finger. It is design ...
2024-12-09 19:16:17
|