31 - 40 of 121
finger probe test
Selling leads
|
Test Probe 19 Child Small Finger Probe According to IEC61032 with 10N Force Applied Introduction: It is designed according to IEC61032 figure 13. This ...
2024-12-09 18:22:24
|
|
... access to hazardous parts by children of more than 36 months and less than 14 years 3. Application range: Accessible enclosure live parts or ...
2024-12-09 19:16:17
|
|
Test Probe 12 Cylindrical Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 8. This ...
2024-12-09 18:22:24
|
|
... clause 8.1, IEC61010-1 clause 6.2.2 and Figure B.1, IEC60884-1 clause 10.1, AS/NZS3112 clause 3.14.12.4 and Appendix K3 requirements. It is used ...
2025-04-27 00:06:27
|
|
Test Probe 13 Conincal Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 9. The pin ...
2024-12-09 18:22:24
|
|
...Test Finger Probe with Third-lab Calibration Certificate 1. Introduction The IP code test probes are designed accoring to IEC60529 and IEC61032 ...
2026-06-28 00:15:53
|
|
IEC61010-1 Clause 6.2.2 Figure B.2 Jointed Finger Probe 1. Introduction The Test Probe B, named as Jointed finger Probe, is designed according to the ...
2026-06-28 00:15:53
|
|
... that can bend in 90 degrees and made by insulating material, the handle can customized with terminals or M6 threaded hole to work with force gauge...
2024-12-09 18:49:48
|
|
...etc. This wire is intended to verify the protection of persons against access to hazardous parts. It is used to verify the protection against ...
2024-12-09 18:22:24
|
|
... finger nail probe is mainly used for shocking or the non-removable parts of contacting with moving parts to determine whether it can withstand the ...
2024-12-09 18:22:24
|