21 - 30 of 121
finger probe test
Selling leads
|
...simulate access to hazardous parts by children of more than 36 months and less than 14 years. Specification of Small Child Finger Probe: Diameter ...
2026-06-28 00:15:53
|
|
...Finger Test Probe Kits / IEC61032 Test Probe 19 1. Introduction: Test probe 19 (child small finger probe) is designed according to IEC61032 figure ...
2026-06-28 00:15:53
|
|
Test Finger Probe with 125mm Stop Meet the requirement of IEC60335-2-14 Introduction The test finger probe is designed according to IEC60335, GB4706.1...
2024-12-09 18:22:24
|
|
...Testing Equipment IEC 62196 Test Finger Probe B with 42V Electric Indicator Test Finger Probe B is a high-precision testing instrument designed ...
2026-03-05 07:30:15
|
|
...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other ...
2025-09-29 00:17:29
|
|
... 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical ...
2024-12-09 18:35:34
|
|
... to verify adequate clearance from hazardous parts. Object probe: a test probe simulating a solid foreign object to verify the possibility of ...
2024-12-09 18:22:24
|
|
...Figure 12 of the IEC 61032 (Test probe 18) and is used to simulate a children human finger. It is also used by the standards of CSA, IRAM, UL. IEC ...
2024-12-09 18:28:53
|
|
...Test Finger Probe Hazardous Moving Parts Probe for Fan Blades Introduction Hazardous moving part probe is conforms to the standards of UL507 figure ...
2024-12-09 18:22:24
|
|
... figure 9.1 (PA160). It is applied to test the accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. The ...
2024-12-09 18:22:24
|