1 - 10 of 207
water separability test apparatus
Selling leads
|
... sample and distilled water,stir 5 minutes under certain temperature,record needed time for separation of emulsified liquid.After half hour or one ...
2025-07-24 00:16:01
|
|
...Water Separability Test Apparatus AIC-1401 water separability tester.pdf Introduction The water separability apparatus is suitable to measure the ...
2025-07-24 00:16:01
|
|
...Test Apparatus Introduction: ● Test standard:EN 14112 & EN 15751 ●Temperature controlling:PID digital controller,temperature is controlled ...
2024-12-09 19:27:52
|
|
... brake fluid into a test sample, and place it with 1/8 rubber bowl and aluminum and cast iron pieces. After keeping it in the instrument for 168 ...
2024-12-10 00:37:04
|
|
...determine relative density of engine coolants and engine coolant concentrates.The structure is separated,and operatio is easy.It is highly improve ...
2024-12-09 19:27:52
|
|
... the oil sample to temperature 25,50 or 75℃,blow compressed air through the test oil,make make it stirred strongly.Air becomes small bubbles in the ...
2025-07-24 00:16:01
|
|
... hydraulic fluid. During the test, the sample, water and copper strip instrument shall be sealed in the pressure resistant glass, and then placed ...
2024-12-09 21:12:26
|
|
... placing it at a specified test temperature for a set period, then removing it to observe changes in appearance such as transparency, precipitation...
2024-12-10 00:37:04
|
|
Summary This Evaporation Loss Test Apparatus is used to evaluate the high-temperature performance of brake fluid. The test principle involves placing ...
2024-12-10 00:37:04
|
|
... them on the rubber bowl inside the test bottle, add water-containing brake fluid to submerge the test pieces, cover, and then place them in the ...
2024-12-10 00:37:04
|