161 - 170 of 206
copper corrosion test apparatus
Selling leads
|
Summary 1. The Corrosive Sulfur Tester has an air guide cooling system, when the surface temperature of the instrument is too high, it will automatica...
2024-12-09 20:31:24
|
|
...79 °C (100 °F and 175 °F) under the prescribed laboratory conditions. It is not to be considered the equivalent of service evaluation tests. ...
2026-04-20 00:17:58
|
|
...Test Equipment Catalogs for EN 373&348&6942&367&702.pdf Introduction A new term heat transfer index (HTI) has been introduced to avoid confusion ...
2024-12-09 19:27:37
|
|
...closed system composed of a reservoir, a water pump, a radiator and rubber pipes. Its corrosion resistance is determined by the weight loss of ...
2026-04-20 00:17:58
|
|
... bundles, and then completely immersed in the specified samples. At the end of the test, take out the test piece, weigh it again after cleaning, ...
2026-04-20 00:17:58
|
|
...Test Set Introduction This Insulating Oil Oxidation Stability Test Set is suitable to determine oxidation stability of unused hydrocarbon based ...
2026-04-20 00:17:58
|
|
...m the mean time in seconds to achieve a temperature rise of 24±0.2℃ when testing by this method using a copper disc and a starting temperature of ...
2024-12-09 19:56:39
|
|
Performance Characteristics 1.Executive standard: GB/T4074.3-2008/IEC60851-3; Inspection standard: JB/T4279.9-2008 2.This Resistance to Abrasion Test ...
2024-12-09 21:17:30
|
|
Performance Characteristics 1.Executive standard: GB/T4074.3-2008,IEC60851-3; Inspection standard: JB/T4279.4-2008 2.This Springiness Test Instrument ...
2024-12-09 21:19:05
|
|
...require manual conduct. The principle is to put the sample, distilled water and copper catalyst coil into the glass tube together, and then put it ...
2026-04-20 00:17:58
|