ASTM D1264 Water Washout Characteristics Tester For Grease Testing
|
Detailed Product Description
|
Corrosion-Preventive Properties Test Instrument
Introduction: This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 °C and 79 °C (100 °F and 175 °F) under the prescribed laboratory conditions. It is not to be considered the equivalent of service evaluation tests. Precision and bias was determined using grease ranging from NLGI 3 to 0 grades in the research report.
Features: 1.The case of Water Washout Characteristics Tester is made of good
quality glazed steel plate,which is reliable. 2.The bearing chamber and case can meet requirements of standard
completely. 3.The stainless steel tand has inlet and outlet pipes,the bearing
chamber is aluminum,copper chromium circulating pump,1/4 HP motor. 4.The heater is stainless steel. 5.The temperature controller is integrated with tempeature
controlling and display.It also has micro-processor PID
controller.The accuracy is ±0.1°C,tempeature probe
is PT100 RTD,working tempeature is ambient~100°C.The working
tempeature is usually 37.8 ± 0.1°C and 79 ± 0.1°C. 6. The rotation speed of motor with belt is 600 ± 30 rpm. 7.The design of motor and belt can start the circulating pump with
start measuring bearing. 8.The regulator and by-pass valve can adjust the flow rate of 1mm
capillary to 5 ± 0.5 ml/s.
Specifications:
|
||||||||||||||||
| Product Tags: Water Washout Characteristics Tester Water Washout Tester ASTM D1264 |
Related Products
|
ASTM D217 Mechanical Grease Worker for Grease Testing with Penetrometer |
|
ASTM D4170 Fretting Wear Test Apparatus for Lubricating Greases |
|
ASTM D6184 Oil Separation Kit for Lubricating Grease (Conical Sieve Method) |
|
ISO 6299 and ASTM D2265 Automatic Dropping Point Test Apparatus with 6 Holes |
|
ASTM D4048 Copper Corrosion Test Apparatus for Lubricating Grease |
|
ASTM D127 Drop Melting Point Apparatus for Petroleum Wax and Grease |
Email to this supplier