51 - 60 of 78
polyurea surface coating
Selling leads
|
... is applied by spraying to mix the two components, generating the elastic waterproof coating. 2. Characteristics High active and fast set. Solid ...
2024-12-09 19:23:09
|
|
... or contacts with moisture in the air, it starts to react and cure, and no gas is released during the reaction process, the coating is dense and ...
2024-12-09 23:26:47
|
|
... or contacts with moisture in the air, it starts to react and cure, and no gas is released during the reaction process, the coating is dense and ...
2026-07-06 00:04:50
|
|
...: Organic Silicon Wetting Agent 707W is used for wetting formulation systems of water-based and oil-based coatings. Good miscibility in various ...
2025-12-31 00:27:31
|
|
...Metal Adhesive 827 for surface treatment and one-coat, suitable for various rubbers Introduction Rubber to Metal Adhesive 827 is an adhesive used ...
2026-07-06 00:04:50
|
|
Polyurethane to Metal Bonding 840 One-Coat Surface Treatment Equivalent to Chemlok 218, Cilbond 48/49, Thixon 422 Description The Polyurethane to ...
2026-07-06 00:04:50
|
|
Titanium Dioxide for Plastic Characteristics Titanium Dioxide for Plastic is a rutile titanium dioxide pigment for plastic application. It is a ...
2024-12-09 23:26:47
|
|
Polyurethane Material for Special Expansion Joints for Bridges and Roads EX-802 Product Overview EX-802 is a 100% solid aromatic polyurea elastomer, ...
2026-04-13 13:41:25
|
|
... rubber (NR), Nitrile butadiene rubber (NBR), Butyl rubber (IIR), EPDM, etc Characteristics As a topcoat, used in conjunction with substrate ...
2026-07-06 00:04:50
|
|
... coating in conjunction with Dual Coat substrate surface treatment agent, suitable for the following rubbers: Natural rubber (NR), Nitrile ...
2026-07-06 00:04:50
|