SR-TD801 Single Component Aspartic Transparent Tiles Waterproof
Coating
Introduction
SR-TD801 single component aspartic is a kind of sealed secondary
amino polyurea resins, which meets water or contacts with moisture
in the air, it starts to react and cure, and no gas is released
during the reaction process, the coating is dense and bubble-free.
No expansion during curing, no shrinkage after curing,
environmentally friendly and non-toxic.
Characteristics
- Curing and Drying Times: When exposed to moisture at room
temperature, curing time is approximately 120 minutes for tack-free
and 24 hours for solid drying. Optimal performance is achieved
after 7 days of curing.
- Solvent-Free and Non-Shrink Formula: Formulated with 100% solids
and no organic solvents to prevent shrinkage over time. Its low
viscosity allows partial penetration into tile cracks.
- High Strength Properties: Exhibits high strength with a tensile
strength exceeding 10MPa. When fully cured, it reaches a Shore D
hardness of 50.
- Minimal Water Absorption: Offers excellent resistance to water
absorption, with only 0.1%, thereby preventing blistering.
- Effective Adhesion: Maintains strong adhesion even on smooth glazed
tiles.
Application
For smooth glazed tiles or smooth glass.
Physical Properties
Item | Parameters |
Viscosity (25℃) | 400 |
Appearance | Flowable liquid |
Tack-free time(h) | 2 |
Curing time (h) | <24 |
Tensile strength (Mpa) | 15 |
Elongation at break (%) | 7 |
Moisture absorption(%) | 0.1 |
Packing
10kg/drum, 20kg/drum
Storage and transportation
SR-TD801 should be stored at temperature 5-35 ℃ and it should be stored in a
cool, ventilated, and dry warehouse, the expiration date is 12
months from the date of packaging.