41 - 50 of 107
terminal mechanical stress test apparatus
Selling leads
|
...Test Apparatus Standard: IEC60884-1 clause 12.2.5, figure 11. Application: It is used to check terminals with screw clamping shall be so designed ...
2024-12-09 19:26:34
|
|
... rigid solid conductor remains clamped, even when it has been deflected during normal installation. Deflecting the conductor and measuring the ...
2025-07-28 00:09:52
|
|
...Test Apparatus For Screw-Type Lamp Holder Test Product information: Standard: IEC60238:2016Edition 9.1 (2017) figure 4. Sample and restrictions: ...
2025-06-28 00:23:28
|
|
... 9.3.1, figure 2a) and figure 2b), BS1363-2: clause 9.3.1 figure 2a) and figure 2b). Technical Parameters: 1. Test pressure:230-240N 2. Hammer ...
2025-03-06 22:27:55
|
|
...Test Apparatus Product Overview: This test apparatus conforms to IEC60065:2014 clause 8.21, figure 14~16, IEC60558-1 Fig6, IEC 60950 and etc. It is ...
2024-12-09 19:38:34
|
|
... position through the cam mechanism driven by servo motor. It is dropped from a height of 40 mm onto a rigidly supported steel plate having a ...
2024-12-09 20:49:45
|
|
...is used to inspect the mechanical strength performance of the irons. Technical Parameters: Standard IEC 60335-2-3 Clause 21.101 Power Supply AC220V...
2025-07-28 00:09:51
|
|
... and restrictions: Doors of column type composite lamps Test purpose: Used to test the impact resistance of the surface of the door of column type ...
2025-03-06 22:28:59
|
|
...Test Apparatus Product Overview: Standard: according to IEC62196-1:2022. Samples and restrictions: DC vehicle plug electronic locking device (refer ...
2025-07-28 00:09:52
|
|
... of IEC60068-2-75, IEC60884-1 clause 24.1, etc. It is suitable for the mechanical strength test of electrical accessories such as plugs and sockets ...
2025-03-06 22:30:21
|