IEC 62196-1 Electric Vehicle Non-rewirable Accessories Flexing Test
Apparatus
Equipment Overview:
The flexibility testing apparatus is designed and manufactured
according to requirements of IEC62196-1: 2020 clause 26.4 figure
20, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to
process the mechanical load flexing test of the vehicle plugs,
socket-outlets and couplers non-rewireable accessories.
The equipment adopts PLC control and operated by 7-inch colour
human-machine interface, uses a servo motor to control the flexing
angle. The flexing angle, flexing speed and the test cycles can be
preset on touch screen. The test is automatically carried out
according to the set parameters. When the test times reach the
preset number of test times, the device automatically stops and
gives the test completion signal prompt. The test equipment has the
advantages of high-precision digital display, high-efficiency
digital frequency conversion, precise speed adjustment, six-digit
memory setting, multi-function modular fixture, rotating center
centering measuring tool, and built-in load which can supply load
voltage to test sample during test.
Technical Parameters:
| Test Station | Single |
| Electrical Control Method | PLC intelligent integrated control, 7-inch humanized touch
interface operation |
| Drive Mode | Servo motor |
| Sample Clamping Method | Mechanical clamping, the position of clamping point is adjustable |
| Flexing Angle | 0-360° can be adjusted freely (default 90°, 45°on either side of
the vertical) |
| Flexing Rate | 0-60 cycles / min, can be preset |
| Flexing Cycles | 0~999999 can be preset, default 20000 cycles |
| Load Weights | 20N, 25N, 50N, 75N, 100N |
| Load Power | Built-in, with adjustable voltage between conductors 0-250V and
current AC0-400A adjustable |
| Test Judgment | Judging by the signals given when the current is conducted or not |
| Equipment Dimensions & Weight | L 850mm *W 800mm *H 1500mm, the whole machine is about 200Kg |
| Power Supply | Three phase AC380V±10%, 50Hz/60Hz |
