1 - 10 of 351
plc flammability test chamber
Selling leads
|
...Flammability Test Chamber Product overview: The needle-flame test method apparatus meets the requirements of IEC60695-11-5, it is required by ...
2025-07-25 00:11:26
|
|
...Flame Flammability Test Chamber PLC Control Test principle: Needle flame tester is a needle burner with a specified size (φ 0.9mm), with specific ...
2025-07-25 00:11:26
|
|
... time delays 0.1S thus to make sure the sufficient time of gas burning; equipped with imported brand flowmeter to ensure the accuracy of the ...
2024-12-09 19:10:13
|
|
...-2-13, UL746A, IEC 60335, IEC 60598, etc. It also conforms to the standard requirement of UL746A. This device simulates the thermal stress test of ...
2025-07-25 00:11:26
|
|
...Flammability Test Chamber Gauge Thermocouple Burner Product overview: These accessories are for various of flammability test chambers, such as glow ...
2024-12-09 19:49:13
|
|
... products are used to assess the degree of fire hazard through simulation techniques. It is mainly used for 1080 VW-1 (vertical-specimen) flame ...
2025-07-25 00:11:26
|
|
IEC 60695-11-10 / 20 50W 500W Horizontal And Vertical Flame Test Apparatus PLC Control Fire Hazard Testing Chamber Overview: This horizontal and ...
2025-07-25 00:11:26
|
|
... according to the standard requirements of IEC 62368-1: 2018 Annex S.3, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3 and etc. It is ...
2025-07-25 00:11:26
|
|
... properties of vertically oriented specimens". It is used to obtain the response characteristics of textile fabrics to flame shrinkage under ...
2024-12-09 22:48:39
|
|
...Flammability Test Chamber New Version Product overview: This car interior flammability test chamber is intended for comparing the relative ...
2025-05-28 22:34:43
|