21 - 30 of 403
plc flammability test chamber
Selling leads
|
...Flammability Test Apparatus Product overview: This device is manufactured according to the standard of IEC60695-2-10, IEC 60695-2-11, IEC 60695-2...
2026-09-08 00:29:57
|
|
...Testing Chamber Application: The textile fabrics burning behavior tester is designed according to ISO 6941:2003 “Measurement of flame spread ...
2026-06-11 18:47:16
|
|
... Annex A.3 Hot Flaming Oil Test Apparatus Product overview: The hot flaming oil test device conforms to IEC60950-1:2005 and IEC60950-1:2013 clause ...
2026-09-08 00:29:59
|
|
...Wire Coil Ignition Test Apparatus for Solid Electrical Insulating Materials Overview: Hot wire ignition test apparatus conforms to IEC60695-2-20...
2026-06-11 18:47:15
|
|
IEC 60695-11-5 Needle-flame Testing Method Small Flame Simulation Fire Hazad Test Appratus Overview: This needle flame test is used to simulate the ...
2026-09-08 00:29:58
|
|
IEC 60335-2-10/11/12/13 Materials Glow-wire Ignitability test Equipment Fire Risk Assessment Apparatus Overview: This fire hazard test device ...
2026-09-08 00:29:57
|
|
IEC 60695-11-2 Horizontal And Vertical Burning Test Apparatus Product overview: This horizontal and vertical burning test apparatus designed and ...
2026-09-08 00:29:59
|
|
...being tested under 11.6kPa (1.68psi). To judge the test result on condition of no explosion, flame, smoke, electric leakage after test. And the ...
2026-06-11 18:44:36
|
|
... combustion oil test device is designed and manufactured according to the standard requirements of IEC 62368-1: 2018 Annex S.3, IEC60950-1:2005 and ...
2026-09-08 00:29:59
|
|
...PLC Control Building Material Flammability Test Device Product information: The flammability test device for building materials is designed and ...
2026-06-11 18:47:25
|