51 - 60 of 69
manual release plug vehicle testing equipment
Selling leads
|
IEC 60068-2-75 Mechanical Strength Test Pendulum Impact Test Apparatus For EV Charging Piles Product Information: Comply with standard EN IEC 61851-1...
2025-07-30 00:08:42
|
|
... 14.1.6, fig13, fig14, table 5.It is used to check the maximum force required when the plug is pulled out of the socket-outlet or connector. ...
2024-12-09 19:39:07
|
|
...2020, 20 and 21 of IEC60309-1: 2012. Used to verify that electrical accessories such as charging interfaces, industrial plugs, sockets and couplers ...
2025-03-06 22:32:05
|
|
... strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle: The free end of the cable and an ...
2024-12-09 20:27:56
|
|
...Test Apparatus For EV Testing IEC 60309-1 Product Introduction For Accessories Mechanical Strength Impact Test Apparatus: The test equipment is ...
2025-07-30 00:08:42
|
|
... Strength Impact Test Apparatus Equipment Introduction: The test equipment is designed and manufactured according to IEC60309-1: 2012 clause 24.2 ...
2024-12-09 20:12:54
|
|
...-1: 2020 clause 26.4 figure 20, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test of the vehicle ...
2025-07-30 00:08:42
|
|
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test Apparatus Standards & Clauses: IEC60309-1: 2012 “Plug, socket-outlets ...
2024-12-09 19:10:13
|
|
BS1363-1 Cyclic Loading Test 20A of Plugs for Charging Electric Vehicles 250 Voltage Product information: The test apparatus conforms to BS1363-1:2016...
2025-03-11 21:25:02
|
|
IEC 62196-1 Charging Gun Electronic Locking Device Comprehensive Test Apparatus Product Overview: Standard: according to IEC62196-1:2022. Samples and ...
2025-07-30 00:08:42
|