IEC 61851-1 2017 Pendulum Impact Test Apparatus For EV Charging Interface

Browse Categories

Electrical Appliance Testing Equipment(472)
Energy Efficiency Lab(52)
Vehicle Testing Equipment(171)
Battery Testing Equipment(93)
Test Equipment For Electric Lab(23)
Switch Life Tester(310)
Led Testing Equipment(84)
Water Ingress Testing Equipment(103)
Environmental Test Chamber(125)
Flammability Test Chamber(67)
MCB Testing Machine(26)
Medical Device Testing Equipment(38)
IEC 62368 Test Equipment(76)

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86--13527656435

Contact Person:
Ms.Zoe Zou View Contact Details

IEC 61851-1 2017 Pendulum Impact Test Apparatus For EV Charging Interface

Brand Name	Sinuo
Model Number	SNQC1008A
Certification	Calibration Certificate (Cost Additional)
Place of Origin	China
Minimum Order Quantity	1
Price	Customized
Payment Terms	T/T
Supply Ability	10 Sets per Month
Delivery Time	25 days
Packaging Details	Plywood
Operation method	Electric lifting
Equivalent mass	5Kg±1%
Height of drop	0-500mm
Swing pipe	Steel pipe
Impact energy	20J
Base plate	Load-bearing steel
Height position	Stroke 200-1200mm,
Way of moving	Support and roller feet

Detailed Product Description

IEC 61851-1:2017 Pendulum Impact Test Apparatus for EV Charging Interface

Product Information For Pendulum Impact Test Apparatus:

Comply with standard EN IEC 61851-1-2019, 12.11 /IEC 61851-1-2017 clause 12.11, IEC60068-2-75:1997, IEC62262:2002, etc. For the mechanical strength test of electric vehicle charging piles for charging vehicles.

Test principle: According to the test Eha: the pendulum, the impact element is freely released at a certain height through a 1-meter pendulum tube, hits the sample at the lowest point in the vertical direction, and through the transformation of gravitational potential energy into kinetic energy, the purpose of impact testing on the sample is achieved.

Structure and features: It adopts a trolley structure, the mounting bracket can be adjusted up and down, and the impact angle can be adjusted to match the height requirements of charging piles of different sizes and different impact points of charging piles.

Technical Parameters For Pendulum Impact Test Apparatus:

Operation method	Electric lifting, electromagnet release
Impact energy	20J (2,5,10,50J energy can be customized)
Impact element equivalent mass	5Kg±1%
Swing pipe	A steel pipe with a length of 1000 mm, an outer diameter of 15.9 mm, and a wall thickness of 1.5 mm
Sample impact height position	Electric adjustable up and down, stroke 200-1200mm, height can be customized
Height of drop	0-500mm, scale display
Impact element fixation and release	Pin type electromagnet fixation and release
Base plate	Thicken load-bearing steel base plate
Way of moving	With support and roller feet, it can be moved to the position of the impact point of the sample
Optional features	Anti-secondary impact function
Attached table	References for impact energy and impact element selection

Attached table: Table 1 Impact component characteristics

Energy /J	≤1 ±10%	2 ±5%	5 ±5%	10 ±5%	20 ±5%	50 ±5%
Equivalent mass ± 2% kg	0.25(0.2)	0.5	1.7	5	5	10
Material	Nylon	Steel
R/mm	10	25	25	50	50	50
D/mm	18.5(20)	35	60	80	100	125
F/mm	6.2(10)	7	10	20	20	25
R/mm	-	-	6	-	10	17
L/mm	Determined according to equivalent mass adjustment, see Appendix A

Table 2 Drop height

Energy /J	0.14	0.2		(0.3)	0.35	(0.4)	0.5		0.7	1	2	5	10	20	50
Equivalent mass /kg	0.25	(0.2)	0.25	(0.2)	0.25	(0.2)	(0.2)	0.25	0.25	0.25	0.5	1.7	5	5	10
Drop height ±1%mm	56	(100)	80	(150)	140	(200)	(250)	200	280	400	400	300	200	400	500
Note 1. See Note 3.2.2; Note 2. The energy unit joule (J) in this part is derived from the standard gravitational acceleration (g), and the value of g is rounded to 10m/s².

Table 3 Correspondence between IK codes and their corresponding collision energies

IK codes	IK00	IK01	IK02	IK03	IK04	IK05	IK06	IK07	IK08	IK09	IK10
Collision energy /J	a	0.14	0.2	0.35	0.5	0.7	1	2	5	10	20
Note 1. If higher collision energy is required, the recommended value is 50J. Note 2. Some national standards use one digit to represent the specified collision energy. In order to avoid confusion with it, the characteristic number is represented by two digits.
According to this standard, it is unprotected

Product Tags: Pendulum Impact Test Apparatus IEC 61851-1 Pendulum Impact Test Apparatus EV Charging Pendulum Impact Test Apparatus

Related Products

IEC 61851-1 EV Charger Pendulum Impact Test Equipment With Pendulum & Drop Hammer Test for sale


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

IEC 61851-1 2017 Pendulum Impact Test Apparatus For EV Charging Interface

IEC 61851-1 2017 Pendulum Impact Test Apparatus For EV Charging Interface

IEC 61851-1 EV Charger Pendulum Impact Test Equipment With Pendulum & Drop Hammer Test

IEC 62196-1 Ed.4CDV Universal Material Tensile Machine 200Kgf

UL 2594 Cla.58 EV Charging Plug Drive-Over 4893N Test Equipment

IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment For Vehicle Connector Crushing Test

EU&UL standard Auto AC Charging Gun Comprehensive Test System

IEC 62196-1 Programmable Temperature Rising Test System 1000A