31 - 40 of 69
manual release plug vehicle testing equipment
Selling leads
|
...: This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull ...
2025-07-24 00:13:47
|
|
...Vehicle Drive Over Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector ...
2025-07-24 00:13:47
|
|
... clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as electric ...
2025-07-24 00:13:47
|
|
IEC 60309-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus Product information: This pull force and torque test ...
2025-07-24 00:13:47
|
|
...-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as electric vehicle charging interfaces, industrial ...
2024-12-09 20:11:50
|
|
UL 2594 Clause 58 Charging Interface Vehicle Rolling Tester 5000/11000N Load Capacity Product information: Conforms to UL2594-2016 clause 58, IEC62196...
2025-07-24 00:13:47
|
|
Vehicle Switch-Outlet Interlock Withdrawal Force Test Apparatus IEC 62196-1 Product InformationN For Vehicle Switch-Outlet Interlock Withdrawal Force ...
2025-03-06 22:31:00
|
|
... information: The test equipment is used to verify accessories shall be so constructed that the temperature rise in normal use is not excessive. It ...
2024-12-09 19:39:07
|
|
...-1: 2012 clause 20,21,22, IEC60998, IEC60669. IEC61058, IEC60439, EIA-3 64-70 and other standards. It is suitable for the electrical plug-in life, ...
2025-07-24 00:13:47
|
|
... 9.34, etc. The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over ...
2025-07-24 00:13:47
|