181 - 190 of 205
insulated handle test finger
Selling leads
|
...Testing Product information: The spring hammer tester conforms to IEC 60068-2-63, IEC 60068-2-75 test Ehb, and required by IEC 60335-1 clause 21.1, ...
2026-06-11 18:51:54
|
|
... minimum size of the plug pins. Usage: Please refer to relative standard requirements. Note: Need to connect with wire at least 1m when processing ...
2026-06-11 18:49:53
|
|
...Test Apparatus For Resistance To Heat For Corrugated Pipes Product information: It is suitable for heat resistance testing of various semi-rigid ...
2026-06-11 18:52:02
|
|
...Test System Laboratory introduction: This laboratory consists of a performance laboratory, a functional laboratory and an equipment room. The ...
2026-06-11 18:40:41
|
|
IEC 61032 Figure 9 Test Probe 13 Product Overview: This probe conforms to the standard requirements of IEC 61032 figure 9 test probe 13, IEC60950 ...
2026-06-11 18:50:06
|
|
IEC 60884 Clause 24.11 3mm Cylindrical Test Tod Product Overview: The 3mm test rod conforms to the IEC 60884-1:2013 clause 24.11 requirement. A ...
2026-06-11 18:50:08
|
|
.... The hammer is used to test the impact resistance of housings, operating arms, handles, knobs, indicator lamps and lamp shades of electrical ...
2026-06-11 18:50:59
|
|
...-outlets, Adaptors and Connection Units Part1:Specification for Rewirable and non-Rewirable 13A plugs figure 9. Performance The scraping frequency ...
2026-06-11 18:50:22
|
|
... and etc. It is used to process steady force test to external enclosures. Technical Parameters: Diameter of circular plane surface of force applied ...
2026-06-11 18:49:57
|
|
....1-2002 and etc. It is used to test the mechanical strength of the external conductive shell and the conductive parts of the external shell of ...
2026-06-11 18:50:29
|