51 - 60 of 278
enclosure protection testing probe
Selling leads
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2026-06-11 18:50:57
|
|
...Probe Experiment Device Used With The Testing Probe IEC 60335-1 Product Information: This anti-shock probe experiment device is designed and ...
2026-06-11 18:51:18
|
|
... similar to that of probe B of IEC 61032 but having a non-circular stop face with a diameter of 56mm. Technical parameters: Model SN2210-2E Name ...
2026-06-11 18:43:47
|
|
...Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 ...
2026-06-11 18:49:58
|
|
...Figure 17 Test Probe 43 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 43 figure 17, etc. This bar is ...
2026-06-11 18:50:07
|
|
... Spray Protection Test System For Vehicle Rain Test With Water Tank Product Information: This rain test room is mainly based on IEC60529:2013 "...
2026-09-08 00:29:59
|
|
... 60529 IP2X. It features an M6 threaded hole at the end of the handle, allowing it to be connected to a force gauge for precise testing application...
2026-06-11 18:43:29
|
|
...Test Probe 2C For Bare Parts Of TNV Circuits Protection Test Product information: Standards: Conforms to IEC60065:2014 Annex B, IEC 62151 Figure 3, ...
2026-06-11 18:52:12
|
|
...s pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Probe Dimension: ...
2026-06-11 18:50:06
|
|
...Test Probe With Thermometer Professional testing equipment for household appliance safety compliance, designed to measure temperature rise on ...
2026-09-08 00:29:57
|