11 - 20 of 272
enclosure protection testing probe
Selling leads
|
...Enclosure Openings Unjointed Test Probe 11 Product Overview: This probe conforms to the standard requirements of IEC 60065:2014 clause 9.1.7, ...
2024-12-09 21:08:53
|
|
IEC 61032 Figure 2 Jointed Probe For Equipment And Persons Enclosures Protect Product information: The joint test probe of figure V.2 is in accordance ...
2024-12-09 20:59:15
|
|
...used to verify the protection against accessing with a finger. It complies with the standard IEC 61032 figure 2, it’s a special instrument for ...
2024-12-09 21:07:59
|
|
...Test Probe 11 With Equipped 75 N Force Dynamometer Safety Compliance Tool Product Overview: The IEC 61032 Test Probe 11 equipped with a 75 N ...
2026-03-12 10:19:16
|
|
...Test Probes 1 Fig. 5 Ф50mm For Housing Intrusion Test Product information: The probe meets the requirements of the standard IEC 61032 Test Probe 1 ...
2024-12-09 22:56:46
|
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC ...
2024-12-09 21:32:27
|
|
... by many standards such as IEC60529 for IP3 testing, IEC 60335-1, IEC60065 and etc. This test probe C is intended to verify the protection of ...
2024-12-09 21:09:49
|
|
... by many standards such as IEC60529 for IP4 testing, IEC 60335-1, IEC60065 and etc. This test probe D is intended to verify the protection of ...
2024-12-09 21:09:49
|
|
...Enclosures Against Ingress Test Probe 1 Figure 5 Ф50mm Product information: This impact steel ball confirms to IEC 60950-1: 2013 Clause 4.2.5, IEC ...
2024-12-09 21:14:49
|
|
...Test Rod Probe D Test Probe With Alligator Clip Product overview: This rod probe is intended to verify the protection of persons against access to ...
2024-12-09 21:22:19
|