IEC 60065 2014 Clause 9.1.7 Enclosure Openings Unjointed Test Probe 11

IEC 60065:2014 Clause 9.1.7 Enclosure Openings Unjointed Test Probe 11
 

Product Overview:

This probe conforms to the standard requirements of IEC 60065:2014 clause 9.1.7, IEC61032 fig.7 test probe 11, etc. This probe may be used to verify the protection of persons against access to hazardous parts and to verify the mechanical strength of openings in the enclosure of internal barriers.

Probe Dimension:

Conforms to IEC61032 fig.7 test probe 11

The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge. At the end of our probe handle, there is a M6 thread hole to match the force gauge. Showing as following reference picture:

Notice

1. The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge. At the end of our probe handle, there is a M6 thread hole to match the force gauge.

2. For verifying whether LIVE PARTS touched, recommended to work with our anti-shock probe experiment device or a 40~50V voltage indicator, using one cable to wire the metal part of the probe with one terminal of the anti-shock probe experiment device, and then another cable to wire the LIVE PART of specimen with the other terminal of the anti-shock probe experiment device.

3. Please do not damage the appliance shape (such as scratching, bending, etc.).

4. Prevented from dust and moisture environment, in order to avoid the oxidation to affect the dimensional accuracy.

5. Be careful of electric shock.