51 - 60 of 83
electric vehicle overpressure test system
Selling leads
|
... under vehicle crushing conditions. This system simulates real-world scenarios where EV charging connectors may be accidentally run over by a ...
2026-09-08 00:29:59
|
|
..., IEC60309-1: 2012 clause 20,21,22, IEC60998, IEC60669. IEC61058, IEC60439, EIA-3 64-70 and other standards. It is suitable for the electrical plug...
2026-09-08 00:29:58
|
|
...23, IEC62196-1: 2020 clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories ...
2026-09-08 00:29:58
|
|
...Test Equipment Complete testing solution with pendulum and drop hammer impact methods for comprehensive mechanical strength evaluation. Product ...
2026-09-08 00:30:00
|
|
...Load Test System for EV Charging Connectors with PLC Control The Vehicle Drive-Over Crushing Test System evaluates the mechanical resistance of ...
2026-09-08 00:29:59
|
|
...Test Apparatus for EV Charging Interface Product Information For Pendulum Impact Test Apparatus: Comply with standard EN IEC 61851-1-2019, 12.11 ...
2026-09-08 00:29:59
|
|
...Test Apparatus Test EV Charging Interface Product Information: This pull force and torque test equipment is used to test the vehicle plugs, and ...
2026-09-08 00:29:59
|
|
..., IEC60068-2-75:1997, IEC62262:2002, etc. For the mechanical strength test of electric vehicle charging piles for charging vehicles. Test principle...
2026-09-08 00:29:59
|
|
...electric vehicle charging stations, fully compliant with IEC 61851-1:2017, clause 11.6. It evaluates whether the charging connector and cable ...
2026-09-08 00:29:59
|
|
...Electric Vehicle Withdrawal Force and Latching Verification Test Equipment Product Information: It is designed and manufactured according to the ...
2026-06-11 18:48:45
|