Clause 16.16 EV Withdrawal Force And Latching Verification Test Equipment
|
|
IEC 62196 Clause 16.16 Electric Vehicle Withdrawal Force and Latching Verification Test Equipment
Product Information: It is designed and manufactured according to the standard requirements of IEC 62196-1:2020 clause 16.16, and etc. The fixed accessory (the socket-outlet or vehicle inlet) is mounted such that the mating accessory moves vertically downward into it during the first stage of insertion. A principal weight of 9,2 kg is suitably placed on the mating accessory. If the moving accessory does not enter the fixed accessory to the position required, a supplementary weight of 0,8 kg is allowed to fall from a height of 5 cm onto the principal weight. The moving accessory shall then enter the fixed accessory to the position required to engage the contacts properly.
Technical Parameters:
|
||||||||||||||||||||||||
| Product Tags: Clause 16.16 Verification Test Equipment EV Withdrawal Force Verification Test Equipment 50mm Drop Height Vehicle Testing Equipment | ||||||||||||||||||||||||
|
Dual-Arm Tensile Strength Test Machine with 3kN/5kN Sensors & Deformation Device |
|
Tensile Strength Test Equipment 50KN With Deformation Extensometer Customized test stroke |
|
BS1363-1 Screwless Terminals Thermal Stress Tester For Electrical And Thermal Stresses Test |
|
10KN Tensile Strength Test Machine With Computer Control Tensile Strength And Deformation Test |
|
IEC 62196-3 EV Plug Mechanical Lock Endurance Test Equipment For Charging Interfaces Testing |
|
Withdrawal Force And Latching Verification Test Apparatus IEC 62196-1 For Charging Gun Test |