81 - 90 of 210
conductive charging vehicle testing equipment
Selling leads
|
... developed to evaluate the resistance of insulating materials against surface tracking caused by electrical stress and contamination. The test ...
2026-09-08 00:30:00
|
|
IEC 60335-2-17 Blanket Spark Ignition Test Apparatus Product overview: This device meets the standard of IEC 60335-2-17, Clause 30.101 Figure 113 & ...
2026-06-11 18:41:20
|
|
...-1:2006, IEC60335-1 clause 25.15, IEC60598-1 clause 5.2.10.3, IEC60065 clause 16.5 and etc. Prodcut Information: The tester is used to conduct two ...
2026-06-11 18:50:23
|
|
... of electric vehicles - Part 1: General requirements" Section 7.11.3 GB/T11918.1-2014 Chapter 24.3. Samples and restrictions: Charging gun ...
2026-09-08 00:29:59
|
|
...Test Apparatus for EV Charging Interface Product Information For Pendulum Impact Test Apparatus: Comply with standard EN IEC 61851-1-2019, 12.11 ...
2026-09-08 00:29:59
|
|
..., IEC60068-2-75:1997, IEC62262:2002, etc. For the mechanical strength test of electric vehicle charging piles for charging vehicles. Test principle...
2026-09-08 00:29:59
|
|
...Charging Gun Mechanical Strength Flexing Testing Apparatus Product Overview This flexibility testing apparatus is engineered and manufactured in ...
2026-09-08 00:29:59
|
|
... clause 22 and clause 23, IEC60309-1: 2012 clause 20 and clause 21, etc. It is used to verify whether electrical accessories such as electric ...
2026-09-08 00:29:59
|
|
...Vehicle Drive Over Testing Apparatus For Charging Plug Product information: The test equipment is used to check whether a plug or vehicle connector ...
2026-09-08 00:29:59
|
|
... Test System for EV Charging Connectors with PLC Control The Vehicle Drive-Over Crushing Test System evaluates the mechanical resistance of ...
2026-09-08 00:29:59
|