151 - 160 of 657
abrasion resistance appliance testing equipment
Selling leads
|
... of lithium ion battery or lead acid battery pulse charge and discharge test, DC internal resistance (DCIR) test, cycle life (Cycle Life) test, ...
2026-06-11 18:44:32
|
|
...Test Equipment Overview: This Li-ion battery charge discharge testing equipment meets the requirements of lithium oon battery and cell pulse charge ...
2026-06-11 18:44:31
|
|
...Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle ...
2026-09-08 00:29:58
|
|
IEC 60598-1 Ik High Energy Pendulum hammer Impact Test equipment for Luminaries testing Equipment Overview This test apparatus is used for the impact ...
2026-09-08 00:29:58
|
|
...Test For Post-Top Mounted Luminaires Testing Equipment Product information: This device meets the standards of IEC60598-2-3:2011 clause 3.6.3.1, ...
2026-09-08 00:29:58
|
|
... with clause 33 of the IEC 62196-1:2022 standard and etc., and meets the test method requirements specified in Section 7.21 of the GB/T 20234.1...
2026-09-08 00:29:58
|
|
... Test Equipment Complete testing solution with pendulum and drop hammer impact methods for comprehensive mechanical strength evaluation. Product ...
2026-09-08 00:30:00
|
|
... vehicle crushing. This ensures that charging accessories meet IEC 62196-1:2022 requirements for durability and safety, providing manufacturers ...
2026-09-08 00:29:59
|
|
...meets the requirement that the short circuit device must conform to the range of internal resistance ≤5mΩ, to obtain the maximum short-circuit ...
2026-06-11 18:44:32
|
|
... from being left on the ground. Applied Standards & Clauses IEC 62196-1: 2022 clause 33 UL 2594:2016 clause 58 Test Principle IEC 62196-1:2022 ...
2026-09-08 00:29:59
|