China Electrical Appliance Testing Equipment manufacturer
Sinuo Testing Equipment Co. , Limited
Sinuo Testing Equipment Co., Limited
7
Home > Products > Vehicle Testing Equipment >

Vehicle Inlets Drive Over Testing Equipment Of EV Power Supply Plugs

Vehicle Inlets Drive Over Testing Equipment Of EV Power Supply Plugs

Brand Name Sinuo
Model Number SNQC1010-2
Certification Calibration Certificate (Cost Additional)
Place of Origin China
Minimum Order Quantity 1
Price Negotiation
Payment Terms T/T
Supply Ability 10 Sets Per Month
Delivery Time 1 Month
Packaging Details Plywood Case
Equipment power 1/N-380V 50Hz/TN-S
Rolling speed 0.0-10.0km/h
Tire width 215.0-235.0mm
Tire diameter 10.0-20.0 inch
Flatten ratio 70.0-80.0%
Drive Mode Motor driven
Force weight 5000±250N/11000±550N
Control cabinet W600×D500×H1600mm
Detailed Product Description


Vehicle Inlets Drive Over Testing Equipment Of EV Power Supply Plugs 

 

Product introduction:

 

The vehicle inlets drive over testing machine is designed and manufactured by our company in accordance with clause 33 of the IEC 62196-1:2022 standard and etc., and meets the test method requirements specified in Section 7.21 of the GB/T 20234.1-2023 standard. It is a test equipment used to evaluate the resistance of electric vehicle power supply plugs and power supply sockets and vehicle plugs and vehicle sockets to vehicle crushing.

The equipment is driven by Panasonic servo motor, cylinder and slide mechanism, PLC process control, and touch screen to set test parameters. Use standard P225/75R15 automotive tires and apply a pressure of 5000±250N / 11 000 ± 550 N to the tires using weights. Run over the power supply plug or vehicle plug at a speed of (8±2) km/h (tire inflation pressure 220kPa±10kPa). The entire test process is controlled by the operator, and the system completes it automatically, making it safe and reliable. The equipment has beautiful appearance, high degree of automation, easy and reliable operation, and is durable.


Test Principle:


Place the power plug and vehicle plug with the manufacturer's recommended cables loosely on the cement floor. Use automobile tires with the same load as P225/75R15 to apply a drive over force of (5000±250)N or (11000N±550)N. Drive over the overcharged electric plug or plug function box at a speed of (8±2)km/h (tire inflation pressure 220±10)kPa. Use simulation to test the ability of the power supply plug or plug function box to withstand damage caused by vehicle crushing. The equipment is configured to prevent sample movement.

Technical Parameters:

 

Test stationSingle station
Electrical control methodPLC intelligent integrated control, 7-inch color human-machine touch interface operation
Operation modeManual or program-controlled operation
Power systemMotor plus worm gear acceleration and deceleration
Drive over stroke0~2.0m
Carrying load

A: Rolling force (5000±250)N,
B: Rolling force (11000N±550)N
Switchable.

Drive over speed(8±2)km/h, speed adjustable
Drive over methodIt is driven by a linear motor module to simulate the forward and backward reciprocating motion of rolling tires. This simulates the damage caused by accidental crushing of the charging nozzle head of the charging pile when the car is moving forward or reversing in reality.
Drive over force adjustmentUsing weights, the force range is adjustable from 5000-11000N, and the weights are loaded and unloaded by cantilever crane.
Drive over tires

1. Equipped with one P225/75 R15 tire and one matching wheel hub. A set of tire inflation devices (inflation interface and air pressure gauge).
2. Equipped with 11000N load-bearing tires and a matching wheel hub.

Drive over tire pressure(220±10)kPa
Load bearing base plateBase plate with cement/concrete floor, can be equipped with fixing clamps.
Timing count displayTouch screen design parameters can be set within standard requirements.
Deceleration methodOur company has designed a braking mechanism to prevent rigid collisions.
Safety protection


The whole machine is equipped with a protective fence to prevent the wheels from accidentally deflecting and prevent mechanical injuries to personnel.
With leakage protection switch.
With motor overload protection.

 

 


 


 

Product Tags: Charging Pile Rolling Testing Machine   10.0km/h Charging Pile Rolling Testing Machine  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: Sinuo Testing Equipment Co. , Limited
Subject:
Message:
Characters Remaining: (80/3000)