IEC 60309-1 Charging Interface Cable Bending Testing Machine Vehicle Testing Equipment

Browse Categories

Electrical Appliance Testing Equipment(440)
Energy Efficiency Lab(48)
Vehicle Testing Equipment(162)
Battery Testing Equipment(82)
Switch Life Tester(301)
Led Testing Equipment(84)
Water Ingress Testing Equipment(100)
Environmental Test Chamber(124)
Flammability Test Chamber(66)
MCB Testing Machine(26)
Medical Device Testing Equipment(36)
IEC 62368 Test Equipment(73)
Test Equipment For Electric Lab(23)

Sinuo Testing Equipment Co. , Limited

City: guangzhou

Province/State:guangdong

Country/Region:china

Tel:86--13527656435

Contact Person:
Ms.Zoe Zou View Contact Details

IEC 60309-1 Charging Interface Cable Bending Testing Machine Vehicle Testing Equipment

Brand Name	Sinuo
Model Number	SNQC1009
Certification	Calibration Certificate (Cost Additional)
Place of Origin	China
Minimum Order Quantity	1
Price	Negotiable
Payment Terms	T/T
Supply Ability	10 Sets Per Month
Delivery Time	30 days
Packaging Details	Plywood Case
Drive Mode	Servo motor
Clamping Method	Mechanical clamping
Control Method	PLC control
Test Station	One station
Flexing Rate	0-60 cycles/min
Flexing Angle	0-360°, adjustable
Flexing Cycles	0~999999 can be preset
Load Weights	20N,25N,50N,75N,100N,140N

Detailed Product Description

IEC 60309-1 Charging Interface Cable Bending Testing Machine Vehicle Testing Equipment

Product Overview:

Standard: according to IEC62196-1:2014 clause 7.11 and clause 7.15, IEC60309-1:2012 clause 24.4.

Samples and restrictions: Electric vehicle charging interfaces, industrial plugs, sockets and couplers.

Application: Used to test the bending connection part of the "mechanical strength" part of the power connection cable of the charging vehicle plug and socket.

Test principle: The servo motor is used to drive the turntable to drive the work piece to swing left and right, and the machine will automatically stop when the number of times is reached.

Structure and features: The equipment is driven by a servo motor, and large-size specimens are installed on aluminum plates, which can make the swing axis coincide with the point where the cord enters the instrument as much as possible when clamping the specimen, thereby achieving the minimum lateral displacement of the cord and load.

Usage environment: Power supply: AC220V±10%/50-60Hz, power 3KW.

Technical Parameters:

Equipment dimensions		Approx.: W1000D800H1600mm
Equipment weight		150kg
Test station		Single station
Electrical control method		PLC intelligent integrated control, 7-inch human-machine touch interface operation
Drive mode		Servo motor drive
Specimen clamping method		Mechanical clamping, adjustable clamping point position
Bending angle		0-360° adjustable (default ±45°)
Bending rate	0-60 times/min, can be preset
Bending frequency	0~999999 can be preset, default is 20000 times
Load weight	20N,25N,50N,75N,100N,140N
Load power supply	External connection, optional load cabinet with adjustable voltage between conductors 0-250V and adjustable current AC 0-400A
Test judgment	Judgment based on the signal given by whether the current is conducting or not

Common Faults and Treatments:

No.	Fault	Reason	Treatment
1	Turn on the POWER switch, but the indicator light not turn on	The external power supply is not connected	Please connect to the external power supply
		The fuse is broken	Find out the reason and change the fuse.
		The indicator light damaged	Replace the light
2	Turn on the POWER switch, Touch screen not work	The internal DC24V power supply is in problem	Replace the DC24V power supply
2	Turn on the POWER switch, Touch screen not work	Touchscreen damaged	Replace the touchscreen
3	Touch screen no response	Connection to PLC loose	Reconnect
3	Touch screen no response	Touchscreen damaged	Replace the touchscreen
4	Load power no power supply	Load socket damaged	Replace the socket
4	Load power no power supply	The fuse is broken	Change the fuse
5	Press down Start button, but the fixture do not work.	The display value and preset value of test times are the same	Press Count Cleared
		The E-STOP button is not reset	Release E-STOP button
		There is foreign object in the machine, the machinery is stuck	Remove the foreign object
		It is not under auto test mode	Press Start button
		Connection to motor loosen	Reconnect
		Not in starting position	Homing
6	Motor rotates but the manipulator does not rotate	Check whether the motor output shaft connector is loose	Re-connect
6	Motor rotates but the manipulator does not rotate	Check whether the drive belt is broken or too loose	Replace the drive belt
7	Noise	Swivel speed low or too high	Reset the speed
7	Noise	Connection to motor loosen	Reconnect

Product Tags: IEC 60309-1 Vehicle Testing Equipment Charging Interface Vehicle Testing Equipment

Related Products

EU&UL standard Auto AC Charging Gun Comprehensive Test System for sale


From:	Enter your Email please. Your email is incorrect!
To:	Sinuo Testing Equipment Co. , Limited
Subject:	Subject is empty!
Message:	Characters Remaining: (80/3000) Please enter 20 to 3000 characters to contact this supplier!

IEC 60309-1 Charging Interface Cable Bending Testing Machine Vehicle Testing Equipment

IEC 60309-1 Charging Interface Cable Bending Testing Machine Vehicle Testing Equipment

EU&UL standard Auto AC Charging Gun Comprehensive Test System

IEC 62196-1 Charging Interface Breaking Capacity And Normal Operation Test Apparatus EV Testing

IEC 62196-1 Programmable Temperature Rising Test System 1000A

Vehicle Charging Gun Comprehensive Test System for GB/EU/UL Standards

Cable Anchorage Pull Force And Torque Tester For EV Charging Stations IEC 61851-23

IEC 62196-3: 2022 Electric Vehicle Connectors Temperature Rise Test System