41 - 50 of 104
75mm lamp protection test probe
Selling leads
|
... V.1.6,. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection ...
2026-06-11 18:50:57
|
|
...Probe Experiment Device Used With The Testing Probe IEC 60335-1 Product Information: This anti-shock probe experiment device is designed and ...
2026-06-11 18:51:18
|
|
...Test Probe Product information: The telecom test probe conforms to IEC60950 2013 clause 2.1.1.1, 6.2.1, figure 2C, IEC60065:2014 Annex B, IEC 62151 ...
2026-06-11 18:49:58
|
|
...Figure 17 Test Probe 43 Product Overview: This probe conforms to the standard requirements of IEC 61032 test probe 43 figure 17, etc. This bar is ...
2026-06-11 18:50:07
|
|
Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC ...
2026-06-11 18:53:18
|
|
...Test Probe Product overview: This straight unjointed test probe meets the requirements of IEC 62368-1:2018 clause V.1.3, figure V.1 (but straight ...
2026-06-11 18:50:02
|
|
...Test Probe 2C For Bare Parts Of TNV Circuits Protection Test Product information: Standards: Conforms to IEC60065:2014 Annex B, IEC 62151 Figure 3, ...
2026-06-11 18:52:12
|
|
...s pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Probe Dimension: ...
2026-06-11 18:50:06
|
|
...other vehicles and their parts. This equipment can simulate the cleaning process conditions of high pressure/steam jet cleaning to test the ...
2026-09-08 00:29:59
|
|
...Protection Degrees Comprehensive IPX1~4 Test Chamber Product introduction The waterproof degree test chamber is designed and manufactured according ...
2026-09-08 00:29:59
|