191 - 200 of 206
1n force test probe
Selling leads
|
... 12.2.5 &12.3.10 figure 9, UL486A-B, etc. Application: This device is use to check whether the terminals with screw and screwless terminals can ...
2025-07-31 00:13:20
|
|
...Test Equipment Product Information For Conductor Damage Degree Test Equipment: Standards: IEC 60884-1: 2022 Section 12.2.5 (Figure 11), IEC 60669-1...
2025-07-31 00:13:20
|
|
...Testing Mechanical Strength For Brush Caps And Switch Actuator Product Overview: This UL 1017 Figure 9 Impactor is specifically designed for ...
2025-07-01 19:18:46
|
|
...-outlets, Adaptors and Connection Units Part1:Specification for Rewirable and non-Rewirable 13A plugs figure 9. Performance The scraping frequency ...
2024-12-09 20:30:40
|
|
... sockets, fixed parts fitted with conductors and their connectors under sheath protection without stress, including twisting, at the end of the ...
2024-12-09 20:04:46
|
|
...test probes separately confirm to the IEC 60884-1:2013 clause 10.5, figure 9 and figure 10. The SN2110 test probe with 20N force is used to test ...
2025-03-06 22:31:04
|
|
...force during microwave oven mechanical strength test. Technical Parameters: Spring constant 1.05N/mm Force applied face Ф10mm Force applied range ...
2024-12-09 19:38:19
|
|
... 21 figure 9 and figure 10, IEC 62196-1:2020 clause 10.2, and etc. The SN2110 test probe with 20N force is used to test whether the live parts ...
2024-12-09 21:23:40
|
|
...2016 Clauses 18 and 22.104, and IEC60335-2-4:2017 Clause 18. It’s Used for durability and life testing of the interlock device on washing machine ...
2025-07-31 00:13:19
|
|
...test apparatus conforms to IEC62196-3 clause 36.3, figure 18. Technical Parameters: Power AC220V, 60Hz Control Method PLC control, touch screen ...
2025-07-31 00:13:21
|