31 - 40 of 49
ip66 tds controller
Selling leads
|
IP66 OTA RS485 NH4-N Transmitter For Sewage Controller For Industrial Wastewater The ion-selective electrode method is used to measure the ammonia ...
2026-09-08 00:23:02
|
|
IP66 RS485 Laser Turbidity Transmitter For Wastewater Automatic Control Turbidity varies widely and is typically measured from 0 to 5,000 ntu. Typical ...
2024-12-09 21:09:09
|
|
TDS Salinity Conductivity Analyzer 18~36V For Industrial Wastewater 800g Conductivity is the reciprocal of resistivity, reflecting the amount of salt ...
2024-12-09 20:08:54
|
|
RS485 Interface OTA Conductivity /TDS analyzer For Pure Water DRFN conductivity controller can complete conductivity value and conductivity value ...
2024-12-09 21:09:09
|
|
... meet the continuous measurement and display functions, but also to achieve signal output and control functions. PH/ORP analyzer can be connected ...
2026-09-08 00:23:02
|
|
... for high-demand monitoring and control applications. PH/ORP analyzer can be connected to a variety of traditional pH/T or ORP combination ...
2026-09-08 00:23:02
|
|
... and data is not lost even without power. The output and control configuration are recorded in another configuration list for user find and ...
2026-09-08 00:23:02
|
|
...IP66 Introduction The DRFN's DUC2-CN1.1-H-D residual chlorine analyzer is a single-parameter instrument, it is connected to the residual chlorine ...
2026-09-08 00:23:02
|
|
IP66 Total Chlorine Analyzer 2 SPST Single Parameter For Waterworks Disinfection The total chlorine is the sum of the combined residual chlorine and ...
2026-09-08 00:23:02
|
|
...chlorite. Each controller will be pre-installed with a set of embedded software to adapt to different disinfectant digital sensors. By receiving a ...
2025-03-20 14:31:42
|