61 - 70 of 580
ro4350b rogers pcb board
Selling leads
|
Substrate Introduction Rogers DiClad 527 laminates are composite materials reinforced with woven fiberglass for use as substrates in printed circuit ...
2026-05-27 18:52:08
|
|
...) 1.1 General description This is a type of 2 oz double sided PCB built on FR-4 substrate with Tg 150°C for the application of micro SATA carrier ...
2026-05-29 14:59:31
|
|
... for reference) 1.1 General description This is a type of impedance controlled PCB built on FR-4 material with Tg 175°C for the application of ...
2026-05-27 18:53:45
|
|
... thick without silkscreen on yellow solder mask (Taiyo) and immersion gold on pads. The base material is from Taiwan ITEQ supplying 72 up PCB per ...
2026-05-27 18:53:51
|
|
...PCB 4 Layer Thiner Circuit Board Built On 0.4mm FR-4 With Immersion Gold for Data Acquisition 1.1 General description This is a type of 4 layer PCB ...
2026-05-27 18:53:52
|
|
.... It's 1.6 mm thick with white silkscreen on green solder mask and immersion gold on pads. The base material is from ITEQ supply 1 up board per ...
2026-05-29 14:59:27
|
|
...size of 0.2mm, providing superior electrical performance and reliability. The boards also have a wide range of surface finishes available, ...
2026-05-27 18:51:43
|
|
PTFE PCB Board Built On 1.5mm PTFE Plate with 3oz Copper and Immersion Silver Pads for Power Amplifier (Printed Circuit Boards are custom-made ...
2026-05-27 18:53:30
|
|
...PCB Board Build On 4mil Rogers RO4350B and High Tg FR-4 for 4G Signal Booster (PCB’s are custom-made products, the picture and parameters shown are ...
2026-05-29 14:59:25
|
|
...RO4350B PCB Double-Sided Rogers RF Laminate This PCB is a high-performance 2-layer rigid RF (Radio Frequency) board, constructed using Rogers ...
2026-05-27 18:51:14
|