231 - 240 of 387
immersion gold finish pcb
Selling leads
|
...PCB 0.8mm Thick 2-Layer 1OZ with Immersion Gold This high-performance 2-layer rigid PCB is crafted from TSM-DS3, a ceramic-filled reinforced ...
2026-05-27 18:51:11
|
|
Taconic High Frequency PCB Built on RF-35TC 10mil 0.254mm with Immersion Gold for Filters and Couplers etc. (Printed Circuit Boards are custom-made ...
2026-05-27 18:54:38
|
|
... on top side and bottom side, plated through holes connect each layer. Viewing from the stack-up, each dielectric material is more than 0.2mmm ...
2026-06-09 09:54:59
|
|
Countersunk Aluminum PCB Countersink MCPCB Made On 1oz Copper With Immersion Gold 1.1 General description This is a type of Aluminum PCB for the ...
2026-05-29 14:59:50
|
|
...PCB Built on 30mil RF-60TC with Black Solder Mask Coating Immersion Gold for High Power Amplifiers. (Printed Circuit Boards are custom-made ...
2026-05-27 18:54:41
|
|
... shown are just for reference) Brief Introduction This is a type of Taconic high frequency PCB using RF-35A2 substrate which is ultra low loss ...
2026-05-27 18:54:42
|
|
..., 30mil and 60mil thick Coating with Immersion Gold (PCB's are custom-made products, the picture and parameters shown are just for reference) ...
2026-06-09 09:54:58
|
|
Dual Layer High Frequency PCB Built On 1.5mm PTFE (Teflon) with 3oz Copper and Immersion Gold (PCB's are custom-made products, the picture and ...
2026-07-08 14:41:00
|
|
...PCB Half Holes Circuit Boards Built On 1.6mm FR-4 With Blue Solder Mask (Printed circuits boards are custom-made products, the picture and ...
2026-05-29 14:59:31
|
|
Taconic High Frequency PCB Built on RF-35TC 60mil 1.524mm With Immersion Gold for Satellites (Printed Circuit Boards are custom-made products, the ...
2026-05-27 18:54:39
|